Detergent XADO, 0.25 l

Aprašymas

Quickly cleans the cooling system. Removes rust and dirt. Creates a protective anti-corrosion film on parts of the cooling system. When the cooling system is in operation, deposits form in the cooling system, reducing the efficiency of the cooling system. For efficient engine cooling, it is recommended to flush the system every time the fluid is changed. Dissolves deposits, dirt and rust accumulated in the radiator and cooling system quickly (within 10 minutes). Neutralises acids formed in the system and protects against corrosion. Improves cooling efficiency. Completely safe to use. Neutral to all cooling system materials. Ingredients Surfactants, neutral acids, corrosion inhibitors, additives in water. Dosage 250 ml for a 10-12L cooling system. Instructions for use Warm up the engine to operating temperature. After switching off the engine, pour the product into the radiator tank. Start the engine and let it idle for 10 minutes with the cabin heating switched on. Switch off the engine. Drain the used coolant. Fill the cooling system with water and let the engine idle for 2 to 3 minutes after starting the engine. Switch off the engine, drain the water from the cooling system and add new coolant. ATTENTION! When the engine is hot, the antifreeze in the cooling system is under pressure. Be careful when unscrewing the radiator cap, hot steam or liquid may escape from underneath.