Revitaliser for power steering and other hydraulic systems XADO Revitalizant EX120, 0.009 l

Aprašymas

Gel-Revitaliser for hydraulic is designed for protection from wear-out and restoring repair of power steering without disassembling. The gel forms a new cermet coating on friction surfaces. As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times longer. It may be used for revitalization of any hydraulic equipment. Decreases effort on a steering wheel Increases performance level of a pump Improves the accuracy of hydraulic system operation after 31-62 miles Reduces noise and vibration of a steering wheel booster pump Protects parts from wear-out in case of low oil level Eliminates pump howling Application Treatment of a unit with 1 -2 L hydraulic system capacity. 1. Introduce (spray) the contents of a tube (can)* in the fluid, which is warmed up to the operating temperature, in the tank of a power steering pump. 2. After the revitalizant is applied and the engine is turned on, wait 2-3 minutes and turn the steering wheel for 5 minutes. 3. Revitalization is considered complete after the mechanism has been in operation for 50 hours ( 950 miles of run). *It is recommended preliminary to dissolve the contents of the can (tube) in small amount (~ 50 ml) of used hydraulic fluid. If the fluid in the tank of a power steering pump is contaminated (opaque or has change its initial colour etc.), it is recommended to change hydraulic fluid before application. Note The feature of revitalization is improvement in operation of steering gear (reduction of effort on wheel, operation accuracy, noise reduction) after the first miles. If after 62-124 mi mechanism operation improvement does not occur, the most probable matter is a mistaken diagnostics.