VeryLube Car Resin Cleaner

Aprašymas

Removal of combustion deposits (coke) from piston rings. A fast-acting product designed to remove combustion deposits (coke) from piston rings in petrol and diesel engines; it removes all soot and tarry deposits from the surfaces of the cylinder-piston assembly. No need to change the engine oil after use. Instructions for use: Step 1: Warm up the engine. The engine should be warm, but not hot. Step 2: Remove the spark plugs. Disconnect the ignition timing sensor, Hall effect sensor or distributor. Step 3: Inject the product into each cylinder in turn, waiting 5–8 seconds between each injection. Screw the spark plugs back in. Wait 10–20 minutes. Remove the spark plugs. Cover the spark plug holes with an absorbent cloth to prevent any mud from splashing onto the paintwork. Crank the engine for a few seconds using the starter. Step 4: Refit the spark plugs. Step 5: Start the engine and allow the crankshaft to run at increased revs for up to 15 minutes. During this time, any remaining carbon deposits will be removed via the exhaust system. Dosage: 1 can — 20 cylinders. Notes: avoid contact with paintwork and varnish; safe for catalytic converters, oxygen sensors, technical rubber components and seals. Can be used to flush the engine oil system: Spray the product into the oil filler neck of a warmed-up engine, using 40 ml of the product per 3–5 litres of oil. Allow the engine to idle for 10–15 minutes. Change the oil and the oil filter. Benefits: Restores piston ring clearance. Reduces oil consumption. Removes all types of contaminants (soot, carbon deposits, varnish, resins) from the cylinders, pistons, combustion chamber and valves. Evens out cylinder compression. Reduces engine noise whilst running. Removes deposits from spark plugs. Reduces the level of harmful emissions released into the atmosphere.