ENEOS Hyper 5W40 1L

Aprašymas

ENEOS Premium Hyper 5W40 1L
ENEOSPremium Hyper 5W40 is a state-of-the-art full synthetic engine oil for passenger car petrol and diesel engines with or without catalytic converters, diesel particulate filters (DPF), soot filters, turbochargers, and direct injection systems. This oil guarantees fast and stable lubrication, high thermal stability under heavy loads over a wide temperature range. These low-sulphate, low-phosphorus and low-sulphur lubricants are suitable for all European passenger car engines and provide less frequent changes, cleaner combustion, lower fuel consumption, low oil consumption and lower emissions. This oil can also be used in engines other than Euro 4 engines.
Features

1. Full synthetic engine oil with a deposit control formula A new generation of low-sulphate, low-ash, low-phosphorus and low-sulphur engine oils provides good protection at longer oil change intervals. This oil has been developed for the VAG group (Volkswagen, Audi, Seat and Skoda) for passenger cars and light-duty commercial vehicles. In addition, it is designed to suit VW diesel engines with direct injection per injector pump technology (PDi/TDi with red D and red i) and engines specified to use VW 505.01 engine oils. Also used on Euro IV Mercedes Benz and BMW cars with soot filters to prevent filter clogging. Improves the performance and extends the life of the Diesel Particulate Filter, preventing premature clogging.
2. Longer oil drain intervals Thanks to its outstanding resistance to oxidation, this oil offers exceptional engine durability and extremely long drain intervals.
3. Increased wear resistance and spotless cleanliness The oil film remains strong under high temperatures, high speeds and loads. Wear protection is particularly effective in units with overhead shaft systems. This oil has exceptional thermal and oxidative stability, keeping the engine clean and preventing the formation of deposits that can block the engine or clog the pump.

Use of
For petrol, CNG and light-duty diesel engines with or without turbocharger, catalytic converter or DPF, as well as direct injection engines.
Quality level

ENEOS Premium Hyper 5W40:
 

API
SN/CF

ACEA
ACEA: C3, A3/B4 (08)

VW
500.00/505.00/502.00/505.01

MB-Approval
229.31 229.51

BMW
ll-01 ll-04

GM
Dexos 2

Technical characteristics

ENEOS Premium Hyper 5W40
Units of measurement
SAE 5W40

Relative density at 20°C
g/cm3
0.85

Kinematic viscosity at 100°C
cSt
14.3

Kinematic viscosity at 40°C
cSt
86.6

Viscosity index
-
172

Temperature of the plenum
°C
226

Stagnation temperature
°C
-40