XADO RED ANTICARBON 320ml

Aprašymas

A comprehensive decoking tool.
A new, fast-acting formula designed to soften and remove tough carbon deposits from the piston bottoms and rings of petrol and diesel engines. Removes all carbon deposits and resin contamination from the cylinder-piston group cavities.
Loosens the rings.
Cleans cylinders and pistons, combustion chambers, valves from all types of contamination (carbon deposits, coke, varnish, resins).Equalizes cylinder compression.Removes deposits from spark plugs/spark plugs.Safe for use with catalytic converters, oxygen sensors, rubber products and seals.
Usage:

Warm up the engine. The engine should be warm but not hot.
Turn off the spark plugs (injectors or glow plugs).
Disconnect the ignition timing sensor connector, the Holo sensor or the switch. Disconnect the fuel supply to the cylinders.
Spray the product into each cylinder in turn (up to 5 seconds) via the hose nozzle. Replace the spark plugs (nozzles or glow plugs) to ensure that the product does not evaporate. Wait 10-20 minutes.
Unscrew the spark plugs (nozzles). Cover the spark plug holes with an absorbent cloth to prevent dirt from flying out onto the paint on the car body parts. Run the engine with the starter for a few seconds. The procedure can be repeated 2-4 times.
To avoid "dry" friction when starting the engine after descaling, it is recommended to add 10 to 15 mg of fresh engine oil to each cylinder.
Install the spark plugs (injectors or glow plugs), connect the wires and sensors and connect the fuel supply.
Start the engine and let it run at a higher speed for up to 15 minutes. During this time, the softened coke residue will be removed through the exhaust system*.

Notes:* For complete removal of remaining pollutants, it is recommended to drive at the maximum speed allowed for 5-10 km.
Dosage:
One 320 ml aerosol can is enough to remove dirt from 20 cylinders.
Packaging:
Dispenser 320ml XA 41011